Bolton 3 Axis CNC Milling Machine 12" X 31" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included

Bolton 3 Axis CNC Milling Machine 12" X 31" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included Reviews

Other Picture

Bolton 3 Axis CNC Milling Machine 12" X 31" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included Feature

• Bolton 3 Axis CNC Milling Machine 12" X 31" Table Size , Large Table Travels,100-3000 Rpm Spindle Speeds, R8 Taper,2 Hp 3 Phase Motor, Includes All Software ,Instructional Dvd and 1 Year Warrantty Included

Multiple G code imput , Servo motor, 2 hp 3 phase 220/440v,The straightforward machine design is supported with extensive technical documentation, telephone support, and warranty service Fully set up and ready to run, optional techincial training support for your staff available for a nominal fee.

Visit Store Now !!

Detail Products

Detail Reviews

May 31, 2011 15:30:03

Jet 321920 GH-1460ZX 14-Inch Swing by 60-Inch between Centers Large Spindle Bore Metalworking Lathe

Jet 321920 GH-1460ZX 14-Inch Swing by 60-Inch between Centers Large Spindle Bore Metalworking Lathe Reviews

Other Picture

Jet 321920 GH-1460ZX 14-Inch Swing by 60-Inch between Centers Large Spindle Bore Metalworking Lathe Feature

• 7.5HP, 3Ph, 230/460V motor (Prewired 230V) for optimal turning power
• 3-1/8-inch spindle hole for large turning applications
• 12 spindle speeds ranging from 42-1800 RPM for a wide variety of turning applications
• Chrome molybdenum headstock gears are hardened, ground, and shaved
• Universal gearbox allows inch, metric, diametral, and module pitch threads, no change gears required

The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Stand Included: Yes, HP: 7.5, Volts: 230/460V pre-wired 230V, Speed (RPM): 42 - 1,800, Spindle Speeds (qty.): 12, Width Between Centers (in.): 60, Carriage Travel (in.): 55, Thread Cutting (in.): 1 5/8 - 72, Thread Cutting (mm): .05 - 20, Dimensions L x W x H (in.): 117 x 40 x 48

Visit Store Now !!

Detail Products

Detail Reviews

May 30, 2011 10:32:03

Proxxon 37020 DB 250 MICRO Woodturning Lathe

Proxxon 37020 DB 250 MICRO Woodturning Lathe Reviews

Other Picture

Proxxon 37020 DB 250 MICRO Woodturning Lathe Feature

• Comes with 6 collets: 5/64, 1/8, 5/32, 15/64 and 5/16 inch (2, 3, 4, 6, 8 and 10 millimeter)
• Quiet motor with long lifetime
• Adjustable tool rest, aluminum cast bed, tailstock with live center and other professional features

Technical data: Centre Distance 9 27/32" (250 mm) Max Power 85 W Swing Distance 1 37/64" (40 mm) Volts 110-120V AC, 60 Hz Tailstock travel 3/4" Tailstock travel 3/4" Speed 500 and 5,000 rpm Weight 6.2 lb Includes 6 collets 5/64", 7/64", 5/32", 15/64", 5/16" and 13/32" (2, 3, 4, 6, 8, 10 mm) and faceplates for both headstock and tailstock. The ball bearing spindle is tapered to accept collets and bored through at 13/32" (10 mm). It allows even serial production of small parts. Stable tool rest with prism for centering may be secured at any height. Two faceplates for bigger work pieces are included. ABS headstock with long life and quiet motor for more than 1,000 hours of operation. Stable bed made from aluminum profile. Tailstock is adjustable with 3/4" (20 mm) quill travel. Centreless working or faceplate work is accommodated by turning the tool rest through 90°. The work piece is fixed to the faceplate by means of normal woodscrews. At low rpms the electronic speed control even assists in semi-automatic painting process. Note: Lathe does NOT include Turning Tools. These are available as an option 27023 Proxxon Turning Tools.

Visit Store Now !!

Detail Products

• Proxxon 27026 Three Jaw Chuck for the Lathe DB 250
• Proxxon 27028 Drill Chuck with Sliding Sleeve for Tailstock of DB 250
• Proxxon 27023 Turning Tool Set in Box, 5-Piece
• Proxxon 27024 4-Jaw Chuck for Micro Wood Turning Lathe DB 250
• Proxxon 28731 85mm Crosscut Saw Blade Super Cut for FKS/E 80-Teeth

Detail Reviews

May 29, 2011 12:42:03

Grizzly H2669 Hobby Lathe

Grizzly H2669 Hobby Lathe Reviews

Other Picture

Grizzly H2669 Hobby Lathe Feature

• 24" between centers
• 360° head swivel
• 6" swing over bed
• Aluminum alloy bed construction

This Hobby Lathe is the perfect set up for anyone with an electric drill. Includes sanding disc and table.

Visit Store Now !!

Detail Products

• PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set
• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• 8 Pc Wood Lathe Chisel Set
• Grizzly H6139 1/2" Reversible Drill
• Big Horn 19053 8-Inch Caliper Set, 3-Piece

Detail Reviews

May 28, 2011 17:38:31

JET JHL-610 Hobby Lathe

JET JHL-610 Hobby Lathe Reviews

Other Picture

JET JHL-610 Hobby Lathe Feature

• Electronic Variable Speed 100-2000RPM
• Over-load protection
• Leadscrew is protected under the bed with auto-feed mechanizam
• Cross-slide has an industrial-style bolt-down heavy cast-iron tool holder with calibrated feed
• Cast iron MT-1 tailstock

Includes JET JHL-610 Hobby Lathe - 321200

Visit Store Now !!

Detail Products

Detail Reviews

May 27, 2011 10:16:04

JET GH-1440ZX Lathe with ACU-RITE 300S DRO

JET GH-1440ZX Lathe with ACU-RITE 300S DRO Reviews

Other Picture

JET GH-1440ZX Lathe with ACU-RITE 300S DRO Feature

• Uniquely designed exclusively by JET
• ISO 9001 certified manufacturer
• 3-1/8" bore spindle is supported by two tapered and one ball bearing
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required

Includes GH-1440ZX Lathe with ACU-RITE 300S DRO - 321301, 10-in Scroll 3-Jaw Chuck With Top Reversing Jaws, 12-in Independent 4-Jaw Chuck, 12-in Face Plate (16-in Models), 16-in Face Plate (18-in Models), Follow Rest, Large Capacity Steady Rest, Fully Integrated Coolant System, Full Length Splash Guard and Coolant Return, Articulating Halogen Work Lamp, Centrally Located Controls with Jog Button, Threading Dial, Mounting Pads and Levelers, Spindle Sleeve (MT-7 - MT-5), Dead Center, Live Center

Visit Store Now !!

Detail Products

Detail Reviews

May 25, 2011 18:49:05

Coolant system for use with AT320, AT320L & CQ9332A can be used with 110v or 220v 7 gallon capacity

Coolant system for use with AT320, AT320L & CQ9332A can be used with 110v or 220v 7 gallon capacity Reviews

Other Picture

Coolant system for use with AT320, AT320L & CQ9332A can be used with 110v or 220v 7 gallon capacity Feature

• AT320L ,AT320 and CQ9332A

Coolant system for use with AT320, AT320L & CQ9332A can be used with 110v or 220v 7 gallon capacity

Visit Store Now !!

Detail Products

Detail Reviews

May 24, 2011 15:17:03

General International 25-036 36-Inch Wood Lathe Duplicator

General International 25-036 36-Inch Wood Lathe Duplicator Reviews

Other Picture

General International 25-036 36-Inch Wood Lathe Duplicator Feature

• Creates perfectly matched spindles with ease
• Fits most 12 to 22-inch floor model lathes with cast bedways
• Extruded aluminum base and carriage
• Smooth hand wheel controlled rack and pinion system
• High speed steel cutter

For anyone who has to make more than a single turned object, duplicators are almost essential to a good job-most tables, for example, look more professionally done when all the legs match. A smooth hand wheel controlled rack and pinion system creates perfectly matched spindles with ease. Works off a template or original turning and features extruded aluminum base and carriage, high-speed steel cutter and fits most 12" to 22" floor model lathes with cast bedways. Specifications: Maximum duplicating length: 36" Maximum duplicating diameter: 2"- 20" - depending on lathe swing over bed Maximum duplicating depth: 3" Maximum original spindle diameter: 5" Maximum width of template: 3" Maximum depth of cut per pass: 1/4" - 1/8" recommended

Visit Store Now !!

Detail Products

• Makita BDF452HW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit

Detail Reviews

May 23, 2011 11:31:07

Bolton 12" X 30" Gear Driven Metal Lathe, Comes Complete with Cooling System, Stand, Light, Standard Accessories, 110 or 220 Volt Set Up, 1 1/2 Hp Motor 1 1/2" Spindle Bore,standard Accessories and Full 1 Year Manufacturers Warranty

Bolton 12" X 30" Gear Driven Metal Lathe, Comes Complete with Cooling System, Stand, Light, Standard Accessories, 110 or 220 Volt Set Up, 1 1/2 Hp Motor 1 1/2" Spindle Bore,standard Accessories and Full 1 Year Manufacturers Warranty Reviews

Other Picture

Bolton 12" X 30" Gear Driven Metal Lathe, Comes Complete with Cooling System, Stand, Light, Standard Accessories, 110 or 220 Volt Set Up, 1 1/2 Hp Motor 1 1/2" Spindle Bore,standard Accessories and Full 1 Year Manufacturers Warranty Feature

• 12" X 30" Gear Driven Metal Lathe 1 1/2 horsepower 1 1/2" Spindle Bore
• 1 1/2" Spindle Bore, MT#3, 12 speeds
• 110 or 220 Volt Set Up, MT#3 , Power feed
• Comes Complete with Cooling System, Stand, Light, & Standard Accessories
• Full 1 Year Manufacturers Warranty

Swing over bed 12-3/5" Swing over carriage 7-7/8" Distance between centers 750mm 30" Lathe Chuck Diameter 6-7/10" 3 Jaw Self Centering chuck Spindle taper MT5# Spindle through bore 1-1/2" Spindle Speeds 12(60-1600 RPM) Metric threads 15 (0.5-4mm) Inch threads 23 (5-48 1/n") Longitudinal feed rates 0.1-1.50mm/r 0.004-0.059 in.per revolution Cross feed rates 0.022-0.3mm/r 0.0008-0.0118 in.per revolution Tailstock barrel Taper MT3# Tailstock barrel travel 80mm 3-1/7" 1-1/2hp,110 or 220 Volt setup ships with standard accessories and full 1 year manufacturers warranty!

Visit Store Now !!

Detail Products

Detail Reviews

May 22, 2011 14:52:07

Grizzly G4016 13-1/2" x 40" Gear Head Lathe w/ Stand

Grizzly G4016 13-1/2" x 40" Gear Head Lathe w/ Stand Reviews

Other Picture

Grizzly G4016 13-1/2" x 40" Gear Head Lathe w/ Stand Feature

• Tailstock barrel taper: MT#3 ? Tailstock barrel travel: 3-1/2" ? Number of speeds: 8 ? Range of speeds: 78, 128, 210, 330, 510, 830, 1360, 2100 RPM
• Thread range (inches): 40 @ 4 TPI-112 TPI ? Thread range (metric): 40 @ 0.2mm-6mm ? Motor: 2 HP, Single Phase, TEFC, 220V, 11.9 Amps, 60 Hz, 1750 RPM.
• Overall length: 71-1/2" ? Overall width: 26" ? Height with stand: 52-1/2" ? Height of center line: 45-1/2" ? Approx. shipping weight: 1330 lbs

Delivering all the power & versatility you're looking for, this popular 8-speed, 13-1/2" x 40" metal lathe combines a brawny 2-HP motor with the sure control of a precision gear head system. Choose from speeds ranging between 78 RPM & 2100 RPM without all the inconvenience of belts & pulleys. A terrific lathe for the serious machinist or job shop. This great rock solid cast iron lathe comes with a Cam-Lock Spindle, heavy-gauge steel chip tray & backsplash, & fiberglass headstock cover. FEATURES ? Induction hardened bedways ? Flame hardened headstock gears ? Tapered roller & ball bearings STANDARD EQUIPMENT ? 6" 3-Jaw chuck ? 8" 4-Jaw chuck ? 12" face plate ? Steady rest ? Follow rest ? 4-Way turret tool post ? Live center ? 2 #3 MT dead centers ? Threading dial ? Stand ? Chip pan ? Splash guard ? Stand ? Jog button & emergency stop Specifications: ? Swing over bed: 13-1/2" ? Swing over gap: 19" ? Swing over cross slide: 8" ? Distance between centers: 40" ? Bed width: 7-3/8" ? Spindle bore: 1-7/16" ? Spindle nose: D1-4 Camlock ? Taper in spindle nose: MT#5 ? Maximum carriage travel: 35" ? Cross slide travel: 6-1/4" ? Compound travel: 2-7/8" ? Maximum tool size: 5/8" x 5/8" ? Feed rod diameter: 3/4" ? Leadscrew: 7/8" x 8" TPI ? Range of longitudinal feeds (inches/rev.): 40 @ 0.0036"-0.1005" ? Range of cross feeds (inches/rev.): 40 @ 0.00123"-0.0345"

Visit Store Now !!

Detail Products

Detail Reviews

May 21, 2011 11:18:07

3.5" x 8" lathe and chuck package, metric

3.5" x 8" lathe and chuck package, metric Reviews

Other Picture

3.5" x 8" lathe and chuck package, metric Feature

• Size: Turns 3.5 diameter parts over the bed, 8 between centers
• Includes 2.5" 3-Jaw and Jacobs drill chucks
• 48-page color instruction manual
• One year warranty
• Handwheels calibrated in .01mm increments

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000. Made in USA. A Package includes 2.5 3-jaw chuck and ¼ Jacobs tailstock drill chuck. Save money compared to adding chucks separately.

Visit Store Now !!

Detail Products

Detail Reviews

May 20, 2011 07:54:11

JET GHB-1340A Lathe with C80 DRO, TAK and COLLET CLSR

JET GHB-1340A Lathe with C80 DRO, TAK and COLLET CLSR Reviews

Other Picture

JET GHB-1340A Lathe with C80 DRO, TAK and COLLET CLSR Feature

• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings

Includes GHB-1340A Lathe with C80 DRO, TAK and Collet Closer - 321104, 6-in 3-Jaw Direct Mount Chuck with Top Reversing Jaw, 8-in 4-Jaw Chuck, 12-in Faceplate, Four-Way Tool Post, Steady and Follow Rest, Metric Change Gear, Splash Guard, Headstock Center Sleeve, Threading Dial, Tool Box with Tools, Oil Pan, Tolerance Test Sheet

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 07:26:04

- JET Bench Lathe, 8 Speeds, 13in. x 40in., Model# GHB-1340A

- JET Bench Lathe, 8 Speeds, 13in. x 40in., Model# GHB-1340A Reviews

Other Picture

Powerful performer helps you deliver precision metal parts in less time, thanks to geared head. Gear box gives you large threading and feed capabilities without gear changes. 6in. three-jaw chuck. 8in. four-jaw chuck. 12in. face plate. Metric change gears. 4-way tool post. Steady and follow rest. Precision-ground D1-4 spindle. 13in. swing over bed. 18 3/4in. swing through gap. 40in. centers. 1 3/8in. hole through spindle with #3MT. Cuts 40 inch threads and 27 metric threads. Stand Included: No, HP: 2, Volts: 230, Speed (RPM): 70 - 2,000, Spindle Speeds (qty.): 8, Width Between Centers (in.): 40, Carriage Travel (in.): 35, Thread Cutting (in.): 4 - 112 TPI, Thread Cutting (mm): 0.2 - 6

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 08:17:05

JET 708352 JWL-1236 Woodworking Lathe, 12-Inch Swing 3/4 HP 115-Volt 1-Phase

JET 708352 JWL-1236 Woodworking Lathe, 12-Inch Swing 3/4 HP 115-Volt 1-Phase Reviews

Other Picture

JET 708352 JWL-1236 Woodworking Lathe, 12-Inch Swing 3/4 HP 115-Volt 1-Phase Feature

• 12-inch variable speed wood lathe with stand
• 3/4-horsepower motor
• Cast-iron lathe bed
• 183-pounds
• 60 by 17 by 44-inches

To woodworkers who know the reputation of Jet products, the merit of this 12-inch variable-speed lathe should come as no surprise. Start with the guts of any tool, the motor. Prewired for 115 volts and fully encased in a metal housing for longer life, its 3/4-horses turn material at 500 to 3,000 rpm, depending on which of the six speeds you select. The cast-iron lathe bed, headstock, and tailstock provide superior vibration dampening and durability, while the heavy-gauge steel components and stand give rigid support. Pivoting 90 degrees for outboard turning of up to 16-1/2 inches on larger projects, the MT-2 headstock protects a Reeves drive pulley system with which we made quick and easy speed changes. Down on the other end, the hollow tailstock allows for longer hole bores and houses a live center, a luxury standard on all Jet lathes not found in much of the competition.

You'll love the versatility that comes with 34-1/2 inches between working centers and a 12-inch swing capability over the bed (8-3/4 inches over the tool-rest base). All adjustments, whether extending the ram its full 2-1/4 inches or sliding the 12-inch tool rest, move fluidly and clamp down tight with little effort. Designed for use over the long haul, this tool has all the qualities professional woodworkers demand. --Justin Paul Includes 12-in x 34-1/2-in 3/4 HP Woodworking Lathe - 708352, 12-in Tool Rest, 6-in Face Plate, Spur Center, Live Center, Face Shield, Tooling Knockout

Visit Store Now !!

Detail Products

• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish
• PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
• PSI Woodworking LCSIXW High Speed Steel Wood Lathe Chisel Turning Set, 6-Piece
• Wolverine Vari-Grind Attachment
• PSI Woodworking CJAWFJ2 Jumbo Flat Jaws

Detail Reviews

May 17, 2011 11:08:42

1/2hp 40 Inch 4 Speed Power Wood Turning Lathe 14x40 In

1/2hp 40 Inch 4 Speed Power Wood Turning Lathe 14x40 In Reviews

Other Picture

1/2hp 40 Inch 4 Speed Power Wood Turning Lathe 14x40 In Feature

• Wood lathes turning capacity: 14" maximum diameter over bed. 40" maximum between centers.
• Wood lathe pulley system - Four speed, V belts
• Spindle Speeds: 810 RPM to 3400 RPM
• Motor - 350 watt, 1400 RPM, 110 volt AC, mounted to headstock.
• Overall measurements - 14.57" high, 9.45" wide, 59.05" long.

Construction - Headstock, tailstock, foot, tool rest base, and tool rests are of heavy cast iron. Bed is made of heavy steel tubing. Headstock - The drive spindle is a No. 1 Morse taper, threaded 3/4" 16. The out bork end of the drive spindle can also be used for large turning and is threaded 3/4", 16, left hand. Tailstock - Slides along full length of the bed and clamps into position at any distance from the drive spindle. The ram has a hand wheel advance of 2 3/8" with positive lock and is fitted with a No. 1 Morse taper.

Visit Store Now !!

Detail Products

• 8 Pc Wood Lathe Chisel Set
• Learn to Turn: A Beginner's Guide to Woodturning from Start to Finish

Detail Reviews

May 16, 2011 09:15:07

RIKON Mini Lathe Economy

RIKON Mini Lathe Economy Reviews

Other Picture

RIKON Mini Lathe Economy Feature

• 12" Swing/16" Between Centers
• Self-Ejecting Tail Stock
• 4" Tool Rest
• High Quality Rubber Belt System

-Largest mini lathe in the industry. This increased capacity lets you do more while occupying less space. -

Visit Store Now !!

Detail Products

Detail Reviews

May 15, 2011 11:25:05

Arcan Pair of Professional Press Blocks, Model# CRB02

Arcan Pair of Professional Press Blocks, Model# CRB02 Reviews

Other Picture

2in. x 4in. x 11 7/8ft. cold rolled milled steel press blocks. U.S.A. Application: Press blocks, Dimensions L x W x H (in.): 2 x 4 x 11 7/8

Visit Store Now !!

Detail Products

Detail Reviews

May 14, 2011 15:47:04